Altera Stratix II GX PCI Express Development Board - Manual (Page 62)

2–52 Reference Manual Altera Corporation
Stratix II GX PCI Express Development Board August 2006
Off-Chip Memory
Flash Memory
A 512-MB Spansion flash memory device is used to store configuration
files for the FPGA as well as any other necessary data. The target device
does support CFI flash commands. The flash device is used to store
configurations for the Stratix II GX device. Upon power-on one of these
configurations is written into the Stratix II GX device by the MAX II
configuration controller.
f
For more information about the flash configuration operation, refer to
“Configuration Schemes and Status LEDs” on page 2–12 .
Table 2–33 lists flash memory component reference and manufacturing
information.
qdrii_q[34] B16
qdrii_q[35] G18
qdrii_q[4] D12
qdrii_q[5] A12
qdrii_q[6] B13
qdrii_q[7] C14
qdrii_q[8] A14
qdrii_q[9] G14
qdrii_rdn N14
qdrii_rpsn F19
qdrii_rup N13
qdrii_wpsn M15
Table 2–32. QDRII SRAM Pin-Out (Part 4 of 4)
Schematic Signal Name Stratix II GX Pin Number
Table 2–33. Flash Memory Component Reference Information
Board
Reference
Device Description Manufacturer
Manufacturer Part
Number
Manufacturer
Website
U3 512 Mybte flash device Spansion S29GL512N www.spansion.com