2 turning on / off the optional interior socket – BINDER KT 53 User Manual

Page 32

Advertising
background image

KT (E6) 09/2013

Page 32/135

Go back to the initial view with “Home”.

This symbol on the controller display indicates that the door heating is active.

7.2 Turning on / off the optional interior socket

For chambers equipped with the water-protected interior socket (option, chap. 19.6) you can turn on and

off the voltage of the interior socket via the controller.
To access the setting menu, go to

Menu > Optional equipment > Interior socket

Fixed value

08.03.2013 05:05:06

Submenu “Interior socket”.
Select the desired setting

and press the operating button.

“Socket On” = socket with activated voltage

“Socket Off” = socket voltage-free

..\ Interior socket

Socket On

Socket Off

Close

Home

Go back to the initial view with “Home”.

This symbol on the controller display indicates that the interior socket is activated.

7.3 Switching on or off the optional zero-voltage relay control outputs

For units equipped with zero-voltage relay outputs (option, chap. 19.5), you can switch on or off the

output via the controller.
To access the setting menu for the operating modes “Fixed value” and “Control off”, go to

Menu > Optional equipment > Zero-voltage relay control outputs.

The setting for program operation is done through the program editor (chap. 9.3.7).

Fixed value

08.03.2013 05:05:06

Submenu “Zero-voltage relay control outputs”.
The current switching state of the zero-voltage relay

control outputs is indicated. To change it, select the

desired control output

and press the operating button.
The modified switching state is displayed.

“Control output On” = zero-voltage relay output

activated
“Control output Off” = zero-voltage relay output

deactivated

..\ Zero-voltage relay control outputs

Control output 1: Off

Control output 2: Off

Control output 3: Off

Close

Home

Go back to the initial view with “Home”.

A symbol on the controller display indicates the switching state of the three zero-voltage relay

control outputs, as soon as at least one control output is activated

(example: control outputs 1 + 2 activated)

Advertising
This manual is related to the following products: