BINDER KT 53 User Manual
Operating manual, Apt.line™ kt (e6) refrigerated incubator
Advertising
Issue 09/2013
Art. No. 7001-0241
Operating Manual
APT.line™ KT (E6)
Refrigerated Incubator
with microprocessor program controller T4.12
and Peltier Refrigerating Technology
Model
Art. No.
KT 53 (E6)
9020-0250, 9120-0250
KT 53-UL (E6)
9020-0255, 9120-0255
KT 115 (E6)
9020-0209, 9120-0209
KT 115-UL (E6)
9020-0227, 9120-0227
BINDER GmbH
Address
Post office box 102
D-78502 Tuttlingen
Tel.
+49 7462 2005 0
Fax
+49 7462 2005 100
Internet
http://www.binder-world.com
Service Hotline
+49 7462 2005 555
Service Fax
+49 7462 2005 93 555
Service E-Mail
Service Hotline USA
+1 866 885 9794 or +1 631 224 4340 x3
Service Hotline Asia Pacific
+852 39070500 or +852 39070503
Service Hotline Russia and CIS +7 495 98815 17
Advertising
Table of contents
Document Outline
- EG – declaration of conformity
- Product registration
- 1. Safety
- 2. Unit description
- 3. Completeness of delivery, transportation, storage, and location of installation
- 4. Installation of the equipment
- 5. Start up
- 6. Functional overview of the T4.12 chamber controller
- 7. Configuration of optional equipment
- 8. Set-point entry in “Fixed value” operating mode
- 9. Time programs
- 9.1 Starting and running an existing time program
- 9.2 Cancelling a running time program
- 9.3 Creating a new time program
- 9.3.1 Section handling
- 9.3.2 Temperature setpoint
- 9.3.3 Section duration
- 9.3.4 Repeating one or several sections within a time program
- 9.3.5 Tolerance range
- 9.3.6 Set-point ramp and set-point step modes
- 9.3.7 Switching on or off the optional zero-voltage relay outputs
- 9.3.8 Calling up the next parameter
- 9.3.9 Saving the time program and leaving the program editor
- 9.4 Program interruption
- 9.5 Deleting a time program
- 10. Week programs
- 11. Key lock
- 12. General controller settings
- 12.1 Setup wizard
- 12.2 Date and time settings
- 12.3 Selecting the menu language of the T4.12 controller
- 12.4 Setting display brightness
- 12.5 Changing the temperature unit
- 12.6 Defining the data recording rate
- 12.7 Factory reset
- 12.8 Network configuration
- 12.9 Display of the entire network configuration
- 12.10 MAC Address
- 12.11 RS 422 address (with optional RS 422 interface)
- 12.12 Display and entry of the chamber configuration – for service purpose
- 13. Data transfer via USB interface
- 14. Notifications and Alarms
- 15. Event list
- 16. Graphical display of the measured values
- 17. Temperature safety devices
- 18. Notes on refrigerating operation
- 19. Options
- 19.1 Communication software APT-COM™ 3 DataControlSystem (option)
- 19.2 RS 422 interface (option)
- 19.3 Data logger kit (option)
- 19.4 Object temperature display with flexible Pt 100 temperature sensor (option)
- 19.5 Zero-voltage relay alarm output (option)
- 19.6 Analog output for temperature (option)
- 19.7 Zero-voltage relay control outputs (option)
- 19.8 Water protected internal socket (option)
- 20. Maintenance, cleaning, and service
- 21. Disposal
- 22. Troubleshooting
- 23. Technical description
- 24. Contamination clearance certificate
- Word-Lesezeichen