BINDER KT 53 - Manual (Page 73)

KT (E6) 09/2013 Page 73/135
10.3.8 Saving the week program and leaving the program editor
Fixed value 08.03.2013 05:05:06
Week program editor (example).
Press the “Menu” button.
..\ Temperature setpoint [°C]
No. Value Day H:M:S Activity
1 35.00 Monday 08:00:00 Active
2 40.00 Monday 10:00:00 Active
3 35.00 Monday 18:00:00 Active
4 10.00 Monday 20:00:00 Active
5 35.00 Tuesday 08:00:00 Active
6 40.00 Tuesday 10:00:00 Active
7 35.00 Tuesday 18:00:00 Active
8 10.00 Tuesday 20:00:00 Active
Menu
Fixed value 08.03.2013 05:05:06
Submenu “Program menu”.
Select “Program save”
and press the operating button.
..\ Program menu
Select parameter
Save and exit
Save and run
Exit (without saving!)
Close
With the „Close“ button, The controller returns to the week program editor.
Select parameter Changing between temperature and fan speed.
Save and exit
Saving the program. The controller returns to the “Week programs”
submenu. You can now select and start the week program as
described in chap. 10.1.
Save and run
Saving the program and start it. Enter the start date and time, see
chap. 10.1. If another time or week program is running, the program is
only saved, but not started. A corresponding message is displayed.
Exit (without saving!)
Attention: the program is not saved. After a security question the
controller returns to the initial view.
Button „Close“ The controller returns to the week program editor. You can continue
programming.
Make sure that you saved the week program before leaving the program editor.