R) restart pointmaker, S) date/time marker, Su) port initialization – Pointmaker PVI 65 User Manual
Page 101
Boeckeler Instruments, Inc.
Pointmaker PVI-65 HD/SD-SDI Broadcast Video Marker - Page 91
Section Six: Commands for RS-232 Control
Commands
the drawing area. When proximity is off, active pointers remain on-screen
when the pen is lifted.
(R) Restart Pointmaker
The “R” command restarts the Pointmaker. Options include saving current set-
tings and markers in memory (a soft boot), or clearing memory of all settings
and markers (a hard boot).
(S) Date/Time Marker
The “S” command controls options concerning the date/time marker. It dis-
plays as an active marker.
(SU) Port Initialization
The “SU” command controls COMM port detection on start-up. It can also
activate the autodetection process immediately.
<Esc>(PX1
Turn proximity on.
<Esc>(PXØ
Turn proximity off.
<Esc>(PXT
Toggle proximity.
<Esc>(RS
Restart saving current settings and markers in memory.
<Esc>(RH
Restart clearing current settings and markers.
<Esc>(STØ
Displays date/time marker in time only mode.
<Esc>(SDØ
Displays date/time marker in date only mode.
<Esc>(SDT
Displays date/time marker in time only mode.
<Esc>(SDSMMDDYYYY
Set the date.
M=month, D=Day, Y=year
<Esc>(STAHHMM
Set time as a.m.
H=hour, M=minute
<Esc>(STPHHMM
Set time as p.m.
H=hour, M=minute