Pointmaker PVI 65 - Manual (Page 65)

Boeckeler Instruments, Inc. Pointmaker PVI-65 HD/SD-SDI Broadcast Video Marker - Page 55
Section Four: Comm Port Devices Menu Comm Port Operations
NOTE: If the device type listed for a port cannot be permanently
assigned (for example: device type “unknown” or if you try to assign
more than one port for use with other systems (See “Integrating the
PVI-65 with Other Systems” on page 53)), or you just wish to select a
different type, there are two ways to change it. The next two steps
describe how.
5. (optional) Select the arrow to the right of the device type you wish to
change.
Figure 4-2: Device Select Dialog
The Device Select dialog appears.
This dialog presents a scrolling list of all device types currently sup-
ported by the PVI-65 in alphabetical order. The Page Up and Page
Down buttons allow you to quickly scroll through the names until
you find the device type you desire. When you locate and select the
name you wish to assign, it will move to the center of the list, where it
will be highlighted. The new device type is now assigned.
Device types which cannot be selected are in white.
When a “?” button is selected, a screen with further information
about that device type will be displayed.
If a device type that is used for communicating with other systems is
selected, an arrow button will replace its “?” button. Selecting that
arrow button will activate the dialog for setting port parameters.
P a g e U p
P a g e D o w n
C a l c o m p T S ?
?
?
?
?
?
?
?
?
C o m p u t e r
C o n t r o l P o r t
D i g i t i z e r A
D o N o t U s e
D y n e p r o S C 3
D y n e p r o S C 4
F r e e d o m W r i t e r
I n t e l l i t o u c h
DEVICE SELECT, PORT 2