Tc) touch screen corner control, U) undo/erase, V) select an overlay – Pointmaker PVI 65 User Manual
Page 103
Boeckeler Instruments, Inc.
Pointmaker PVI-65 HD/SD-SDI Broadcast Video Marker - Page 93
Section Six: Commands for RS-232 Control
Commands
Font size commands can be assigned to the active text label after it is visible
on the screen:
(TC) Touch Screen Corner Control
The “TC” commands tell the Pointmaker to enable or disable the corner func-
tion areas on a touch screen (See “Touch Screen“ in “Section One: Getting
Started” on page 16)..
(U) Undo/Erase
The “U” command erases the last created anchored marker. Each time this
command is given, an anchored marker will be erased from the overlay, begin-
ning with the most recently anchored marker.
(V) Select an Overlay
The “V” command tells the Pointmaker which overlay to display.
<Esc>(TSØ
Small
works with:
TI Roman, Helvetica, TI Dom Casual, Fargo,
Symbol, Map
<Esc>(TS1
Medium
works with:
TI Roman, Helvetica, TI Dom Casual, Fargo
<Esc>(TS2
Large
works with:
TI Roman, Helvetica, TI Dom Casual, Fargo
<Esc>(TS3
Extra Large
works with:
TI Roman, Helvetica, TI Dom Casual
<Esc>(TCØ
Disable corner function areas
<Esc>(TC1
Enable corner function areas
<Esc>(TC2
Toggle corner function areas
<Esc>(U
Undo the last anchored marker.
<Esc>(V#
Display overlay number specified.
replace # with overlay number desired.
<Esc>(VN
Display next overlay.
<Esc>(VP
Display previous overlay.