Pointmaker PVI 65 - Manual (Page 87)

Boeckeler Instruments, Inc. Pointmaker PVI-65 HD/SD-SDI Broadcast Video Marker - Page 77
Section Five: Using Markers Clearing Markers
From the SMARTBoard
®
1. After marking, activate the Undo/Erase command by picking up the
eraser.
2. Wipe the eraser over your markers.
The markers disappear as you wipe. When you finish erasing, lift the
eraser from the board. Lifting the eraser closes the eraser function,
and enters Marking mode. If you need to erase again, repeat steps
1-3.
From Other Drawing Devices
1. After marking, activate the Undo/Erase command for your particular
controller.
A square eraser appears on screen, ready for positioning.
2. Drag the eraser over the markers
The markers disappear as you wipe. When you lift the drawing device
(that is, your finger or stylus), the Pointmaker closes the eraser func-
tion, and enters Marking Mode. If you need to erase again, repeat the
steps.