Marker and cursor movement – Pointmaker PVI 65 User Manual
Page 27
Boeckeler Instruments, Inc.
Pointmaker PVI-65 HD/SD-SDI Broadcast Video Marker - Page 17
Section One: Getting Started
Peripheral Devices
Marker and Cursor Movement
When operating the Pointmaker with a touch screen, the pointer will be dis-
played and anchored any time you tap the screen (unless the pointer is dis-
abled). A pointer can’t be repositioned using the touch screen; however, it can
be cleared or erased from the screen. Drawing takes place when you press a
finger on the Tracking Area of the screen and drag across it. Menu selections
are made by tapping the menu selection you desire.
Calibrating the touch screen enhances the intuitive feel of drawing on the dis-
play and should be done upon the first installation and whenever a new touch
screen or monitor is used. (See “Controllers Requiring Calibration“ in “Sec-
tion Four: Comm Port Devices Menu” on page 49)
A complete list of commands for this controller is found in “Quick Reference
for Devices“ in the “Appendix” on page A-5. Marking is described in “Section
Five: Using Markers” starting on page 59.