Back panel diagram, Connections, Back – Adtec digital Soloist-HD Pro (version 02.07.09) Manual User Manual
Page 20: Panel, Diagram
Advertising
Back Panel Diagram
Note: Some connectors have been discontinued or changed over the life of the product. Consult your units’ rear panel for correct
placement cables and connectors.
Enlarged back panel segments to show connector placement
Connections
Connection
Function
DVB-ASI IN
Incoming video signals
75 Ohm,terminated SMPTE 259M BNC connector
HD/SD SDI OUT
75 Ohm terminated SMPTE 259M and SMPTE292M (auto-detect) BNC
connector
HDMI
HDMI v1.3 and DVI v1.0 compliant transport
CVBS OUT
75 Ohm terminated NTSC or PAL D1 Composite Video Output. BNC connector
GbE (eth1)
10/100/1000 base T ethernet interface; 2 LED indicators
Link- device networked
Busy- traffic on interface
Advertising
This manual is related to the following products: