Adtec digital Soloist-HD Pro (version 02.07.09) Manual - Manual (Page 31)

Aspect Ratio ratio of horizontal to vertical lines in
the decoded image
Off
AUTO
4x3
16x9
*.DCMD OAR
Blank Mode sets the state of the video output
whenever a unit's
transport is idle or is in transition
No Video
Black
Hold
*.DCMD BLK
Video Position positions the video output on the
display target. Center
Top Right
Top Left
Bottom Right
Bottom Left
*.DCMD OVS
Video Scaling re-sizes the video output. The scale
can be used to reduce the picture
size.
Off
1 - 100% in 1%
increments
*.DCMD OVS
SPDIF Mode compressed or uncompressed audio;
Sony/Phillips Digital Interconnect
Format
Off
Uncompressed
Compressed
Passthrough
*.DCMD SPM
Note: Aspect Ratio and Video Scaling/Position cannot be used at the same time. You must choose one or
the other to control the video output.
When Active Format Description is enabled, aspect ratio is forced to OFF.