Audioscan Verifit - Manual (Page 24)

Verifit ® User's Guide Version 3.12  May 2015
4 General Setup
This section covers Date and Time setup, Display settings (including mouse pointer speed setting) and Saving
test setup.
Date and time setup
To set the date and time that appears on printouts and calibration screens:
1. Press <Setup>, then highlight and <PICK> [Date & Time] on the Setup poster.
2. To change the date, highlight and <PICK> the month window to display a drop-down list of months.
3. Highlight and <PICK> the desired month on the list.
4. Repeat the previous step to change the date, year and time in the appropriate windows.
5. When the new date and time information has been set, press <Continue> to exit.
Display settings
To change the screen language, screen saver timing and the background color for charts (for both the internal
display and any connected external monitor):
1. Press <Setup>, then highlight and <PICK> [Display].
2. To change the screen language, highlight and <PICK> [Language] to toggle between English and German.
3. To change the idle time before the screen saver blanks the screen to prolong display life, highlight and
<PICK> the Screen saver window.
4. Highlight and <PICK> the desired screen saver timing from the drop-down list.
5. To change the background color of the graphic display on the various test screens, highlight and <PICK>
[Color] to toggle between black and white.
6. In this screen you can also select the Mouse pointer speed button and select the response speed from the
drop-down list.
7. Press <Continue> to exit setup.
Saving test setup
This feature lets you retain the last-used stimulus type and level for most tests when the power is turned off and
the last-used target method and transducer type in Viewport, Speechmap and Insertion Gain tests. This feature
also lets you determine how assessment parameters, test levels and stimuli are treated when <Session>, [Erase
data] is selected.
To enable/disable saving of test levels, stimuli and assessment parameters:
24