Audioscan Verifit - Manual (Page 32)

Verifit ® User's Guide Version 3.12  May 2015
4. Insert the paper’s leading edge into the lower slot at rear of tray.
5. Feed the paper by highlighting the on-screen [Paper Feed] button and pressing <PICK>.
6. Advance the paper until it comes out of the upper slot.
7. Place the roll in the paper tray and advance another foot of paper.
8. Lower the printer head using the small black lever. Press <Continue>.
If nothing shows on the paper when you press <Print> and the paper is coming out –check that the glossy
side is up as it comes out of the printer.
Unused thermal paper may darken if stored for prolonged periods at elevated temperatures and lose
contrast if subjected to light. Keep long-term supplies in a cool dry place out of direct light.
Barcodes, tabular data, headers and comments on printouts
The date and a header, such as a facility name, may be added to printouts. Barcodes representing hearing
threshold, UCL and RECD, where applicable, may be added to printouts of Viewport, Speechmap, Insertion
gain and RECD tests. Tabular data, where applicable, may be appended to printouts. Lines for hand-written
notes or typed comments may also be added.
1. Connect a computer keyboard to one of the USB ports on the rear connector panel.
2. Press <Setup>, then highlight and <PICK> [Printing].
3. Highlight [Page setup] and press <PICK> to display the page setup poster.
4. To print the date and time on each printout, highlight and <PICK> [Date].
5. To print lines for handwritten notes, highlight and <PICK> [Lines].
6. To add barcodes for audiometric data, highlight and <PICK> [Barcode].
7. To add tabular data, highlight and <PICK> [Graph with table].
8. To print a fixed header on printouts, highlight and <PICK> [Header]. Enter the desired header (up to 35
characters) on the connected keyboard. Press <PICK> (or Enter on the keyboard number pad) to complete
the entry. To be prompted for a new header for each printout, highlight and <PICK> [Ask].
9. To print fixed comments following a printout, highlight and <PICK> [Description]. Enter comments on the
connected keyboard. Press <PICK> (or Enter on the keyboard number pad) to complete the entry. To be
prompted for new comments for each printout, highlight and <PICK> [Ask].
10. To be prompted for a new file name each time you print to a USB memory stick or a network file, highlight
and <PICK> [Ask]. Do not use space $ \ / or tab in the file name. USB file names are limited to 8 characters.
See Printing to a USB memory stick or Printing to a network file.
11. A print layout for the selected printer is displayed.
12. Press <Continue> to exit page setup and <Continue> to exit Setup.
32