Baby Lock Crescendo (BLCR) Instruction and Reference Guide - Manual (Page 118)

SEWING THE STITCHES
S-44
a
Select .
b
Press to set the machine to free motion
sewing mode.
→ The key appears as , the quilting foot is raised to
the necessary height, then the feed dogs are lowered
for free motion sewing.
c
Attach the adapter (“Attaching the Presser
Foot with the Included Adapter” of “Basic
operations”).
d
Attach the free motion echo quilting foot
“E” on the left side of the adapter with the
holes in the quilting foot and adapter
aligned.
e
Tighten the screw with the included
screwdriver.
Memo
• When starting to sew, the internal sensor
detects the thickness of the fabric, and the
quilting foot is raised to the height specified
in the machine settings screen. Press
to display “Free Motion Foot
Height” of the settings screen (see page
S-15). Press or to change the height
that the quilting foot is raised above the
fabric. To create a greater distance between
the foot and needle plate for sewing thick,
fluffy fabrics, increase the setting by
pressing . To create a lesser distance
between foot and needle plate for sewing
thin fabrics, decrease the setting by
pressing .
• In order to sew with a balanced tension, it
may be necessary to adjust the upper
thread tension (see page S-12). Test with a
sample piece of quilting fabric.
CAUTION
• Be sure to securely tighten the screws with the
included screwdriver. Otherwise, the needle
may touch the quilting foot, causing it to bend
or break.