Baby Lock Crescendo (BLCR) Instruction and Reference Guide - Manual (Page 179)

ABOUT BOBBIN WORK
H
o
w
to C
re
ate
Bobb
in W
o
rk
(S
ew
ing
)
Sewing S-105
S
4 Beautiful embroidery work, with a three-dimensional appearance, can be created by winding the bobbin
with medium to heavy weight thread or ribbon, which is too thick to be threaded through the machine’s
needle. The decorative thread or ribbon will stitch out on the underneath side of fabric while sewing with
the fabric wrong side facing up.
Required Materials
■ Bobbin case and bobbin cover
Bobbin case (gray)
There is a notch at the location indicated by the
letter “A”.
Bobbin cover
There are two small v-shaped tabs on the back of
the bobbin cover as indicated by the letter “B”.
The tabs help hold the bobbin in place so it does
not lift up while thick thread is being pulled
through.
ABOUT BOBBIN WORK
1. Utility stitches 2. Decorative stitches 3. Free motion sewing
PREPARING FOR BOBBIN WORK