Baby Lock Crescendo (BLCR) Instruction and Reference Guide - Manual (Page 200)

TROUBLESHOOTING
A-10
Incorrect thread tension
■ Symptoms
• Symptom 1: The lower thread is visible from the upper side of the fabric.
• Symptom 2: The upper thread appears as a straight line on the upper side of the fabric.
• Symptom 3: The upper thread is visible from the lower side of the fabric.
• Symptom 4: The lower thread appears as a straight line on the lower side of the fabric.
• Symptom 5: The stitching on the lower side of the fabric is loose or has slack.
■ Cause/Remedy
□ Cause 1
The machine is not correctly threaded.
<With symptoms 1 and 2 described above>
The lower threading is incorrect.
Adjust the upper thread tension and then refer to “Upper Thread is Too Tight” on page S-12.
<With symptoms 3 through 5 described above>
The upper threading is incorrect.
Adjust the upper thread tension and then refer to “Tangled thread on wrong side of fabric” on page A-8 to correct
the upper threading.
□ Cause 2
A needle and thread appropriate for the fabric are not being used.
The sewing machine needle that should be used depends on the type of fabric sewn and the thread thickness.
If a needle and thread appropriate for the fabric are not being used, the thread tension will not be adjusted
correctly, causing wrinkles in the fabric or skipped stitches.
* Refer to “Fabric/Thread/Needle Combinations” on page B-53 to check that a needle and thread are appropriate for the
fabric being used.
□ Cause 3
An appropriate upper tension is not selected.
Adjust the upper thread tension to select an appropriate thread tension.
The appropriate thread tension differs according to the type of fabric and thread being used.
* Adjust the thread tension while test sewing on a piece of scrap fabric that is the same as that used in your project.
* When the lower thread is visible on the upper side
of the fabric. Set the upper thread tension to a lower
number. (Loosen the thread tension.)
* When the upper thread is visible on the lower side
of the fabric. Set the upper thread tension to a higher
number. (Tighten the thread tension.)
□ Symptom 1/2 □ Symptom 3/4
a Lower side of fabric
b Lower thread visible on
upper side of fabric
c Upper thread
d Upper side of fabric
e Lower thread
f Upper thread visible from
lower side of fabric
Note
• If the upper threading and lower threading are incorrect, the thread tension cannot be adjusted
correctly, even by adjusting the upper thread tension. Check the upper threading and lower threading
first, and then adjust the thread tension.