Baby Lock Crescendo (BLCR) Instruction and Reference Guide - Manual (Page 44)

UPPER THREADING
B-42
Upper Threading
Press
→
→ →
→ in this order to display a video
example of the operation on the LCD (see page
B-33). Follow the steps explained below to
complete the operation.
a
Turn the main power to ON.
b
Press the “Presser Foot Lifter” button to
raise the presser foot.
→ The upper thread shutter opens so the machine can
be threaded.
a Upper thread shutter
c
Press the “Needle Position” button to raise
the needle.
UPPER THREADING
CAUTION
• Be sure to thread the machine properly.
Improper threading can cause the thread to
tangle and break the needle, leading to injury.
• When using the walking foot, the side cutter or
accessories not included with this machine,
attach the accessory to the machine after
threading the machine.
Memo
• The automatic threading function can be
used with sewing machine needle sizes
75/11 through 100/16.
• Thread such as transparent nylon
monofilament thread and thread with a
thickness of 130/20 or thicker cannot be
used with the automatic threading function.
• The automatic threading function cannot be
used with the wing needle or the twin
needle.
Memo
• This machine is equipped with an upper
thread shutter, allowing you to check that
the upper threading is performed correctly.
Note
• If you try to thread the needle automatically
without raising the needle, the thread may
not thread correctly.