Analog meter config button – Basler Electric IDP-1200 User Manual

Page 19

Advertising
background image

9437200990 Rev C

11

Figure 7. Metering Index Screen

Analog Meter Config Button

Pressing this Metering Index screen button accesses the Analog Meter Configuration screen (Figure 8)
which sets the range of the metering values displayed on the Main, Redundant, and Supervisory Metering
Panels (if so equipped). The minimum and maximum per-unit values for a metered parameter is changed
by pressing the corresponding value. This displays a keypad which is then used to assign the desired
metering limit. A per-unit value of –5.00 to 5.00 may be entered. Pressing the Enter (ENT) button saves
the value.

Figure 8. Analog Meter Configuration Screen

IDP-1200

IDP-1200 Operation with ECS2100 and ECS/RW

Advertising