Basler Electric IDP-1200 - Manual (Page 80)

72 9437200990 Rev C
New Installations
Cut an opening in the mounting panel that is 11.9 inches (302 millimeters) wide and 9 inches (228
millimeters) high. Figure 77 illustrates the panel cutting dimensions. Secure the IDP-1200 to the mounting
panel according to the instructions provided in Securing the IDP-1200.
Figure 77. IDP-1200 Panel Cutting Dimensions for New Installations
Mounting the Ethernet Switch
When installing the IDP-1200, the Multi Drop Adapter (MDA) used with the PanelMate display must be
replaced with the supplied Ethernet switch. The Ethernet switch should be mounted within the control
system enclosure. Mount the Ethernet switch according to the instructions provided in the Ethernet switch
user manual.
Mounting IDP-1200