Basler Electric IDP-1200 - Manual (Page 34)

26 9437200990 Rev C
manual/auto setpoint balance. Metering indications with two values display the actual reading in the upper
row of numbers and the per-unit (PU) value in the lower row of numbers.
Generator Simulation
This screen (Figure 29) gives the user the ability to test a group of settings offline. Controls are provided
for enabling and disabling generator simulation (Simulation Enable), raising and lowering the Auto
setpoint (Raise/Lower Volts), raising and lowering the output power (Turbine Control), toggling between
Auto and Manual modes (Mode Select), and tripping and closing the 41A breaker (AC Breaker). Metering
indicators are provided for common generator and excitation system parameters.
Figure 29. Generator Simulation Screen
Generator Monitor
The Generator Monitor screen (Figure 30) graphically illustrates excitation system and generator status.
Excitation system indicators are provided for ac breaker and PSS status and field voltage and current
levels. Generator voltage, current, watts, vars, and power factor are also displayed.
IDP-1200 Operation with ECS2100 and ECS/RW IDP-1200