Pid commands area, Figure 4-18 pid commands area -17 – Comtech EF Data Vipersat Load Utility v3.5.x User Manual
Page 87
Advertising
Chapter 4 - Using VLoad — Digicast Mode
4-17
Digicast Media Router Remote Commander
PID Commands Area
Figure 4-18 PID Commands area
PID Type – Allows the user to select either a Tuner PID or an ASI PID. In the
image, only the Tuner is enabled.
Update PIDs – Allows the user to add the selected PIDs or edit the PID values
on the selected Digicast receivers.
Delete PIDs – Allows the user to send the command to delete the selected PIDs
from the Digicast receivers selected on the main dialog window. This command
does not delete the PID from the inventory listing on this dialog.
Advertising