Daktronics Pro Series Operations and Maintenance Manual - Manual (Page 31)

SET / CLEAR TARGETS
To set or change the targets, touch SET /
CLEAR TARGETS (Figure 5.14). The screen will
display the Set/Clear Targets panel (Figure 5.15).
Clear Target
Touch the desired CLEAR button to clear a target
(Figure 5.15). The CLEAR button touched will
change to read CONFIRM. Touch this button to confirm
clearing the target.
Note: Clearing an upper (or lower) target resets
its value to the upper (or lower) limit.
Setting Targets
Touch SET TARGETS. The Set Targets panel displays
(Figure 5.16). Select which target to set from the
dropdown menu
(Figure 5.16a).
Enter a new value
for the target
with the keypad.
Touch KEYPAD to
confirm the new
value.
Alternately, touch
CURRENT to
use the current
position of the
batten as the target.
After entering a new target or using the
current batten position, touch CONTINUE
to return to the main screen.
A limit is the operational boundary of a motor.
A motor can not move outside its limits, which
are set by an administrator.
A target is a preset motor position that may be
set within the limits set by the administrator.
Figure 5.14: Set/Clear Targets button
Figure 5.15: Set/Clear Targets panel
Figure 5.16: Set Targets panel
Figure 5-16a: Dropdown menu
24