Daktronics Pro Series Operations and Maintenance Manual User Manual
Page 45
Cuesheet: / A / B / C /
Number
Title / Motor - Group / Action
Target
Speed / Time
Next
Show Name:
Figure 7.9: Blank cue sheet
Cuesheet: / A / B / C /
Number
Title / Motor - Group / Action
Target
Speed / Time
Next
A00.00
Initial Motor Setup
A01.00
Cue 1
A01.00.0
Motor 0
UPPER
1.4 ft./sec.
AND
A01.00.1
Motor 1
LOWER
15 sec.
END
A02.00
Cue 2
A02.00.0
Motor 0
LOWER
1.4 ft./sec.
AND
A02.00.1
Motor 3
15' 6"
12 sec.
END
Show Name:
Example Cuesheet
Figure 7.10: Cue sheet for new show
Figure 7.9 is an example of a blank cue sheet
(additional copies can be found later in this manual).
Figure 7.10. shows an example of one of the cue
lists within the cue sheet showing three cues filled in
(cues 0,1 and 2) and their associated actions (cue
1.00 three actions, cue 2.00 one action).
The very first cue (00.00) for this show is the starting
position for all the motors. The programmable cues
start with the second line.
Cue 1.00 has three cue actions: moving Motor 0,
Motor 1 and Motor 2. Each motor will move to either
their upper or lower target (see the Manual chapter
to see how to set this). Each action will move at 1.4
feet per second.
The Next column displays either AND or END. The
rule is: If there are more actions in this cue, the Next
value is AND. If there are no more actions in this
cue, the Next value is END.
Figures 7.11 and 7.12 show a fictional stage with
battens at random positions like they might be at the
start of creating a new show. The upper and lower
limits are set by the administrator.
Use the manual screen to set upper and lower targets
for the three motors in the motor list. Move the motors
to a point in between their upper and lower targets
for the starting position.
38
Figure 7.11: Battens at random positions, viewed
from stage left
Figure 7.12: Battens ready to set Cue 00.00, viewed
from stage left
S TA G E
C E I L I N G
F R O N T
B A C K
M0
M1
M2
UPPER LIMIT
LOWER LIMIT
S TA G E
C E I L I N G
F R O N T
B A C K
M0
M1
M2
UPPER LIMIT
UPPER TARGET
LOWER TARGET
LOWER LIMIT