Daktronics Pro Series Operations and Maintenance Manual - Manual (Page 33)

Curtain control
If the controller is set to control a curtain, the display
will look like Figure 5.21.
The Up / Down buttons will change to Open / Close
buttons (Figure 5.22). These function the same as
the Up / Down buttons.
Open target
This dark blue button shows the value for the upper
target. Blue vertical line shows the curtain position
at the upper target.
Current position
This light blue bar shows the value of the curtain’s
current position. As the curtain moves, this red
curtain graphic will move as well.
Alternate target
Alternate target positions are shown with gold
vertical bars.
Close target
This green button shows the value for the lower
target. Green vertical lines show the curtain
position at the lower target.
Figure 5.21: Curtain controller
Figure 5.22: Open arrow depressed
Figure 5.23: Curtain indicator
Open target
Current position
Close target
26