Daktronics Pro Series Operations and Maintenance Manual - Manual (Page 54)

47
Figure 7.37: Setting up screen
Figure 7.38: Run motors screen
Figure 7.39: Running screen for Cue 01.00
Figure 7.37 shows the setup running for the
selected cue.
The motors being moved into position and the status
of the operation are shown in the Setup window.
WARNING If any problems arise during
any hoist motions, depress the
E-Stop button located below the
monitor immediately and all hoist
movements will stop.
After the setup is completed, the cue is ready to run
(Figure 7.38).
The cue is being executed (Figure 7.39).
Touch RUN CUE to start the cue, or touch
DIFFERENT CUE to change the selected cue. The
Run Cue screen will display (Figure 7.35) to select
another cue.
CUEING