Daktronics Pro Series Operations and Maintenance Manual - Manual (Page 77)

SPEED
The speed button is located under the Motor
Select dropdown menu (Figure 9.18). To change the
speed, touch and hold down the speed button. Slide
it to the right to increase the speed of the selected
motor, or left to decrease the speed.
Above the button, the current speed is shown on the
left, while the maximum speed of the selected motor
is shown on the right.
Set Speed Numerically
To adjust the speed with greater accuracy,
touch the speed button twice quickly (double-click).
The controller will display a keypad for manual entry
(Figure 9.19). Enter the new speed value and touch
USE KEYPAD ENTRY to confirm the entered value.
UP/DOWN
These buttons raise or lower the batten. They
are colored blue for up and green for down.
To move the motor, touch and hold an arrow
key. When pressed, they divide into three
areas (Figure 9.20).
Press minus (-) to decrease the speed, or to
plus (+) to increase it while the motor is moving.
The motor will stop moving when the button is no
longer pressed or the motor has reached its limit.
Figure 9.18: Speed button
Figure 9.19: Enter speed numerically
Figure 9.20: Up arrow depressed
70