Daktronics Pro Series Operations and Maintenance Manual - Manual (Page 44)

Figure 7.6: Manual screen
CUEING 37
If the motors are not in their correct position, touch
MANUAL SCREEN. The VAC will display the
Manual Screen (Figure 7.6). Us the controllers
on this screen to move the motors to the correct
positions. (For more information see the Manual
chapter.)
.
There are three cue sheets per show: A, B and C.
The initial screen for a new show with no existing
cues is shown (Figure 7.7). At any point the
operator may view or edit the other sheets, simply
touch the desired tab or the sheet itself.
Cue Sheet B initial screen is illustrated (Figure 7.8)
with no existing cues.
Figure 7.7: Newly cue sheet
Figure 7.8: Cue Sheet B initial screen