Niveo Professional NGS16TP - Manual (Page 64)

60
NIVEO PROFESSIONAL Gigabit Management Switch
User's Manual
Untag vid: 1
Priority for untagged traffic:Low
Private-VLAN mode: Normal
IP Address of IP Filter:
Netmask of IP Filter:
8. show ip command
This command is used to show current IGMP configuration and switch IP configuration.
# show ip ?
igmp
IGMP snooping
interface Interface information
redirects Default gateway configured for this device
show ip igmp snooping command will show current switch IGMP configuration.
show ip igmp snooping mrouter command will show current IGMP multicast router
setting.
For example,
# show ip igmp snooping
IGMP Status:
Disable
IGMP Querying: Disable
IGMP Querying: Disable
IGMP Query Interval: 125 seconds
IGMP Report Delay: 15 seconds
IGMP Query Timeout: 255 seconds
# show ip igmp snooping mrouter
Type M'cast Router Ports
------ --------------------
static Eth 1/
show ip interface command will show current switch IP configuration.
For example,
# show ip interface
IP address and netmask: 192.168.1.12 255.255.255.0 on VLAN 1
show ip redirects command will show current IP gateway setting of the switch.
For example,
# show ip redirects
gateway: 192.168.1.254
9. show ip-filter command
This command is used to show current IP-Filter function status of the switch.
# show ip-filter
IP Filter Configuration
IP Address Filter: Disable