Niveo Professional NGS16TP - Manual (Page 71)

67
NIVEO PROFESSIONAL Gigabit Management Switch
User's Manual
# show running-config
!building running-config, please wait.....
!
calendar set 9 30 14 january 1 1970
!
interface VLAN 1
IP address 192.168.1.1 255.255.255.0
!
SNTP server 220.130.158.54
!
……
……
!
interface ethernet 1/10
port-vlan 1 Default_VLAN
!
!
!end
22. show rate-limit command
This command is used to show rate limit settings.
For example,
#show rate-limit
Ingress Drop Mode: Enable
Rate Control Unit(Kbps): 128
[Rate Control Configuration]
Port Ingress Egress
================================================
1/1 No Limit No Limit
1/2 No Limit No Limit
1/3 No Limit No Limit
1/4 No Limit No Limit
1/5 No Limit No Limit
1/6 No Limit No Limit
1/7 No Limit No Limit
1/8 No Limit No Limit
1/9 No Limit No Limit
1/10 No Limit No Limit
23. show snmp command
This command is used to show SNMP configuration of the switch.
For example,
# show snmp
[SNMP Configuration]
Object ID : 1.3.6.1.4.1.x.60.10
System up Time: 597 (seconds)