Niveo Professional NGS16TP - Manual (Page 72)

68
NIVEO PROFESSIONAL Gigabit Management Switch
User's Manual
System Name :
Location :
Contact name :
Get Community : public
Set Community : private
[Trap Community]
ID Status Community IP Address
1 Disabled public 0.0.0.0
2 Disabled public 0.0.0.0
3 Disabled public 0.0.0.0
4 Disabled public 0.0.0.0
5 Disabled public 0.0.0.0
Version: V3V2cV1
Username: admin
SnmpSecurityLevel: noauth
Authentication: MD5
Privacy: Des
24. show sntp command
This command is used to show system time settings of the switch.
For example,
# show sntp
====================================
[Time Configuration]
====================================
Get Time By : Manually
Time Server : 220.130.158.54
Time Zone : Japan(+9)(37)
Current Time : 1970/01/01-09:29:45
D.S.T. status: Disable
D.S.T. start : 1st/SUN/JAN/0:00
D.S.T. end : 1st/SUN/JAN/0:00
====================================
* D.S.T. Is Daylight Saving Time.
25. show spanning-tree command
This command is used to show spanning tree configuration of the switch.
show spanning-tree command is used to show all spanning tree configuration (for
bridge and ports).
show spanning-tree ethernet 1/x command is used show spanning tree configuration
of Port x. (“x” is the port number.)
For example,
# show spanning-tree ethernet 1/5
Bridge Port Number: 5
Port Priority (0..255): 128
Port State: Linked Down