Niveo Professional NGS16TP - Manual (Page 96)

92
NIVEO PROFESSIONAL Gigabit Management Switch
User's Manual
6.4.5 Address Table
These are functions about Mac address table. They are “Static Address Assign”,
“Dynamic Address Table”, and “Aging Time Setup”.
1). Static Addresses
This switch supports static Mac address assignment. You can assign static Mac addresses
by the following steps ...
a. Give an Entry ID. This ID is used as the index of the entry in Static Address Table.
b. Give the VLAN ID. If 802.1Q is disable, the VID will always be 1. This VID will put the
static Mac address in some VLAN for 802.1Q VLAN operation.
c. Fill the Mac address. This is the Static Mac Address for this entry.
d. Select the port for this Static Address.
e. Click [Confirm Add/Change] button.
Then this entry will be added to the table.
In “Current Static Address Setting” table, you can edit and delete an entry. (Different Mac
Address will be another entry. Mac Address is not allowed to edit for an entry.)
The switch will not age out these static Mac addresses. But there is a limitation for these
static Mac addresses - they are allowed to work on the assigned port only because they
are static fixed on the assigned port.
If you want to delete an entry in the static Mac address table, click [Delete] button of the
entry and the static Mac address will be removed from the table.
If you want to modify an entry, click [Edit] button of the entry. Do the modification and
click [Confirm Add/Change] button. (Different Mac Address will be another entry. Mac
Address is not allowed to edit for an entry.)