Niveo Professional NGS16TP - Manual (Page 73)

69
NIVEO PROFESSIONAL Gigabit Management Switch
User's Manual
Port Enable : Enabled
Is edge : No
Port Path Cost(1..65535): 19
Port Designated Root: 00:00:00:00:00:00 [ 0 ]
Port Designated Cost: 0
Port Designated Bridge: 00:00:00:00:00:00 [ 0 ]
Designated Port: 5: [ 128 ]
Port Forward Transitions: 0
Port Role: Nonstp
Point To Point: Yes
26. show system command
This command is used to show general system information/configuration of the switch.
For example,
# show system
System Configuration
Main Board Information:
Firmware Version: 1.04.14
Mac Address: 00:11:22:33:44:55
Number of Ports: 10
1Q VLAN Max. Group: 1024
DHCP Client: Disable
Time Server: Disable
System Log Status: Enable
Remote Log: Disable
Web server: Enable
Web server port: 80
Web secure server: Disable
Web secure server port: 443
27. show trunk command
This command is used to show trunk configuration of the switch.
# show trunk ?
configuration Show Trunk Configuration
all Shows all Trunking Group Configuration
group Shows Each Trunking Group Configuration
show trunk configuration command is used to show trunk function enable/disable
setting.
show trunk all command is used to show port member settings of all trunk groups.
show trunk group x command is used to show port member settings of Trunk Group x.
(“x” is the trunk group index.)
28. show version command