Niveo Professional NGS16TP - Manual (Page 76)

72
NIVEO PROFESSIONAL Gigabit Management Switch
User's Manual
6.3 About Telnet and SNMP Management Interfaces
6.3.1 About Telnet Management Interface
If you want to use Telnet to manage the switch from remote site, you have to set the
IP/NetMask/Gateway address to the switch first from console. Then use "telnet <IP>"
command to connect to the switch. Its operation interface is the same as console
interface.
6.3.2 About SNMP Management Interface
If you want to use NMS to management the switch from remote site, you have to set the
IP/NetMask/Gateway address to the switch and configure the SNMP setting of the switch
from console first. Then you can use SNMP management program to manage this
switch.
This switch supports SNMP v1, v2c, v3 agent function and MIB II(Interface), Bridge MIB,
802.1Q MIB and Private MIB. The default GET community name is “public” and SET
community name is “private”.
This switch supports up to five trap receivers with different trap community names.