Niveo Professional NGS16TP - Manual (Page 70)

66
NIVEO PROFESSIONAL Gigabit Management Switch
User's Manual
# show port monitor
Mode: Disable
Destination port: 1
Source port:
19. show queue command
This command is used to show traffic scheduling settings for priority queues on ports.
# show queue ?
bandwidth Shows weighted round-robin (WRR) bandwidth
mode Priority queue information
show queue bandwidth command is used to show weighting of priority queues for
bandwitdh sharing of WRR operation.
show queue mode command is used to show traffic scheduling mode for priority
queues. One is Strict Priority (higher priority always get bandwidth service first),
another is WRR (Weight Round Robin, bandwidth is shared between priority queues
with weighting).
For example,
# show queue bandwidth
Queue Scheduling
WRR Setting Table
Priority Weight
Traffic Class 0 1
Traffic Class 1 2
Traffic Class 2 4
Traffic Class 3 8
# show queue mode
Queue mode: Strict
20. show radius-server command
This command is used to show settings for RADIUS Server of 802.1x function.
For example,
# show radius-server
[Redius Server Configuration Menu]
Redius Server IP Address : 192.168.1.222
Redius Server Port Number : 1812
Security Key : 12345678
21. show running-config command
This command is used to show current running configuration of the switch.
For example,