Niveo Professional NGS16TP - Manual (Page 74)

70
NIVEO PROFESSIONAL Gigabit Management Switch
User's Manual
This command is used to show system version information and model information.
For example,
# show version
Firmware Version: 1.05.00
Number of Ports: 10
Model Name: 10G Switch SNMP Management
29. show vlan command
This command is used to show VLAN configuration of the switch.
# show vlan ?
private-vlan Private VLAN
id VLAN interface
name VLAN interface name
port-based Port-Based Virtual LAN Configuration
<cr>
show vlan command is used to show all 802.1Q VLAN settings (enable/disable, VLAN
ID, VLAN Name, VLAN Type, and Assigned ports).
show vlan id x command is used to show VLAN setting of VLAN x. (“x” is the VLAN ID).
show vlan name yyy command is used to show VLAN setting of VLAN yyy. (“yyy” is the
VLAN name).
For example,
# show vlan id 100
Vlan ID: 100
VLAN Type: Static
Name: P100
Ports/Port channel: Eth1/ 1(s) Eth1/ 2(s) Eth1/ 3(s) Eth1/ 4(s)
# show vlan name P100
Vlan ID: 100
VLAN Type: Static
Name: P100
Ports/Port channel: Eth1/ 1(s) Eth1/ 2(s) Eth1/ 3(s) Eth1/ 4(s)
show vlan private-vlan command is used to show Private VLAN settings.
For example,
# show vlan private-vlan
[Private VLAN Port Configuration]
Port# Port Type Primary VLAN Community VLAN Isolated VLAN
==============================================================
Eth 1/ 1 Normal none none none
Eth 1/ 2 Normal none none none
Eth 1/ 3 Normal none none none
Eth 1/ 4 Normal none none none
Eth 1/ 4 Normal 100 none none
Eth 1/ 6 Normal none none none