Seaward Supernova XE - Manual (Page 20)

Quick Reference
10
Quick Reference
Editing the date in all modes
On delivery of the Supernova XE it is necessary to ensure that the
correct time and a date are stored. Once stored the time/date is
retained in memory and does not need to be entered again. To edit
the date: from the MAIN MENU select SETUP, select CHANGE
TIME/DATE, use the cursor keys to highlight the digit to be changed.
To store the changed time/date setting return to the MAIN MENU.
The unit will then display the message STORING SYSTEM DATA.
Entering a User Name
On delivery of Supernova XE it is necessary to ensure that a user
name(s) is stored. To edit the user list: from the MAIN MENU select
SETUP, select EDIT USER LIST / OPTIONS, use the cursor keys
and select a name, a screen will appear "EDIT USER SETTINGS",
press Enter, use the keyboard to type in the desired name and press
ENTER to return to the previous menu.
Storing Appliance Test Results in Automatic mode
The Appliance Test Results will not be stored until you leave the
COMMENTS MENU, upon leaving this menu the unit will display the
messages STORING RESULTS then SAVED OK. Your results have
now been stored.