Seaward Supernova XE - Manual (Page 78)

Downloading to Computer Software
68
Quick Reference
Editing the date in all modes
On delivery of the Supernova XE it is necessary to ensure that the
correct time and a date are stored. Once stored the time/date is
retained in memory and does not need to be entered again. To edit
the date: from the MAIN MENU select SETUP, select, CHANGE
TIME/DATE, use the cursor keys to highlight the digit to be changed.
Press ENTER to confirm the change. To store the changed
time/date setting return to the MAIN MENU. The unit will then display
the message STORING SYSTEM DATA.
Entering a User Name
On delivery of Supernova XE it is necessary to ensure that a user
name(s) is stored. To edit the user list: from the MAIN MENU select
SETUP, select EDIT USER LIST, use the cursor keys and select
USER 1, a screen will appear "EDIT USER NAME" use the keyboard
to type in the desired name and press ENTER to return to the
previous menu.
Editing User Level and Novice Mode
The Supernova XE is delivered with a default setting of novice user
level. To change this setting: from the MAIN MENU select SETUP,
select USER OPTIONS, select USER LEVEL, select the desired level
by selecting either REGULAR or ADVANCED. To store the changed
user level setting return to the MAIN MENU. The unit will then
display the message STORING SYSTEM DATA.
Storing Appliance Test Results in Automatic mode
The Appliance Test Results will not be stored until you leave the
OPTIONS MENU, upon leaving this menu the unit will display the
messages STORING RESULTS then SAVED OK. Your results have
now been stored.