Seaward Supernova XE User Manual
Page 26
How to perform Automatic Tests
16
Use the cursor keys to highlight a location name and press enter to
select the desired option.
Note
Default settings for Sites and Test Sequences are pre-loaded
into the Tester. See ‘How to use Setup’ to change these
settings.
Test Settings
The user has the ability to:-
- Set a specific test sequence by selecting DEFAULT SEQUENCE
- Allow testcodes to determine the test to be carried out
- Use preprogrammed sequences for specific EUTS, e.g IT
Equipment.
Selecting either of the first two options allows settings to be altered.
Selecting any of the remaining options allows the user to commence
immediately with that test.
Press the keyboard shortcut or use the cursor keys to highlight a Test
Sequence and press Enter to
select the desired option.
---LOCATION LIST--
WORKSHOP
CAD ROOM
KITCHEN
--SELECT TEST SETTING--
♦ DEFAULT SEQUENCE
i. USE TESTCODES
A. IT EQUPIMENT 1
B. IT EQUIPMENT 2
C. DOMESTIC 1