Seaward Supernova XE - Manual (Page 55)

How to use Setup
45
-------------------INSULATION-----------------
O/P LIMIT DUR REP
250V 0.5M Ω 2s 0
500V 1.0M Ω 5s 1
2.0M Ω 10s 2
7.0M Ω 30s 4
10.0M Ω 5
50.0M Ω 10
SKIP 15
20
25
30
UL
When you first enter this menu all of the previous value and one of
the field descriptions are highlighted. Use the cursor left and right
keys to highlight the description, then use the cursor up and down
keys to highlight the required setting. Use this process for each
description.
Use the Enter button to save the settings and return to the Test
Settings Editor. Press the Red button to abort changes made to the
settings and return to the Test Settings Editor.
Testcodes
Use the cursor keys and Enter to select one of the Testcode fields.
A Testcode can be entered manually or through a compatible
barcode scanner, reader or wand (see How to use a Barcode
Scanner).
The Supernova XE has two testcodes, when entering a Seaward
PAT testcode they will automatically translated into Supernova XE
testcodes.
Store Settings
Use the cursor keys to highlight the Store Settings option and press
Enter to save the settings and return to the previous menu. Pressing
the Red Button will abort all of the changes made and return to the
previous menu.