Super Systems SDStatus - Manual (Page 57)

SDStatus View and Workstation Operations Manual
Super Systems Inc. Page 57 of 83
Figure 79 - Log In Window
If login was successful, the current user and type (access level) will be shown at the top of the
window (see example in Figure 80).
Figure 80 - Current User and User Type (Access Level) message
Log Out
Use the Log Out option to log out the current user. Once the user is logged out, the Current
User and User Type message will no longer be displayed.
Note on Enabling Sounds in SDStatus Workstation
After alarm sound times are set up in SDStatus View (see Alarm Sound Times on page 45), the
alarm sound files must be added to SDStatus Workstation.
In order for SDStatus Workstation to generate an alarm sound correctly, a sound file in Wave
( .wav ) format must be saved with the same name of the alarm in the “alarm sounds” folder
found in the program folder where SDStatus Workstation is found. Typically, this folder will be
present on the local hard drive of the SDStatus Workstation in the subfolder