Super Systems SDStatus - Manual (Page 77)

SDStatus View and Workstation Operations Manual
Super Systems Inc. Page 77 of 83
To set up alarm sounds, first open the
“Workstations”  “Alarm Sound Times”
menu.
The Alarm Sound Times window will appear. To add an alarm sound time, click the “Add Alarm
Sound Time” button.
In the Add Alarm Sound Time window, select the Alarm Group to which the alarm sound time
will apply. Next, select the number of Days, Hours, and Minutes that must pass before the
alarm sounds in SDStatus Workstation. As an option, you may select the “Use Sound
Frequency” checkbox to enable repetition of the alarm after the first alarm is sounded.
Frequency Days, Frequency Hours, and Frequency Minutes will define the frequency of
repetition.
IMPORTANT!
If a condition that had generated an alarm is no longer true, the alarm will clear whether it
has been acknowledged or not.
Setting Up a Connection to the SDStatus Server
At this point in the process, setup in SDStatus View is complete, unless corrections or edits are
needed.
Before SDStatus Workstation can be configured, it must be installed. If SDStatus Workstation
has not been installed, follow the procedure in SDStatus Workstation: