Displaying and maintaining fast layer 2 forwarding – H3C Technologies H3C WX3000E Series Wireless Switches User Manual
Page 101
Advertising
91
Step Command
Remarks
1.
Enter system view.
system-view
N/A
2.
Enable fast Layer 2
forwarding.
mac-fast-forwarding
Optional.
Enabled by default.
Displaying and maintaining fast Layer 2 forwarding
Task Command
Remarks
Display fast Layer 2
forwarding information.
display mac-fast-forwarding cache { all |
{ destination-mac mac-address | source-mac
mac-address | vlan vlan-id }* } [ verbose ] [ |
{ begin | exclude | include } regular-expression ]
Available in any view
Clear fast Layer 2 forwarding
entries.
reset mac-fast-forwarding cache { all |
{ destination-mac mac-address | source-mac
mac-address | vlan vlan-id }* }
Available in user view
Advertising
This manual is related to the following products: