Configuring ip address negotiation, Configuring the local end as the client, Configuring the local end as the server – H3C Technologies H3C WX3000E Series Wireless Switches User Manual
Page 112
102
Step Command
Remarks
3.
Configure the negotiation
timeout time.
ppp timer negotiate seconds
Optional.
3 seconds by default.
Configuring IP address negotiation
Configuring the local end as the client
Step Command
Remarks
1.
Enter system view.
system-view
N/A
2.
Enter interface view.
interface interface-type
interface-number
N/A
3.
Enable IP address
negotiation.
ip address ppp-negotiate
N/A
Configuring the local end as the server
To configure the local end as the server (for cases where PPP authentication is not enabled):
Step Command
Remarks
1.
Enter system view.
system-view
N/A
2.
Assign an IP address of a global
address pool to the peer or
specify the IP address to be
allocated to the peer.
•
Approach 1:
Define a global address pool
and bind it to the interface:
a.
ip pool pool-number
low-ip-address
[ high-ip-address ]
b.
interface interface-type
interface-number
c.
remote address pool
[ pool-number ]
•
Approach 2:
Specify the IP address to be
allocated to the peer:
a.
interface interface-type
interface-number
b.
remote address
ip-address
Use either approach.
As for the remote address pool
command, if the pool-number
argument is not provided, the
global address pool numbered 0
is used.
To configure the local end as the server (for cases where PPP authentication is enabled):
Step Command
Remarks
1.
Enter system view.
system-view
N/A
2.
Enter domain view.
domain domain-name
N/A
3.
Define the domain address
pool.
ip pool pool-number low-ip-address
[ high-ip-address ]
N/A