H3C Technologies H3C WX3000E Series Wireless Switches - Manual (Page 106)

96
Figure 27 PPP link phases
For more information about PPP, see RFC 1661.
Configuring PAP authentication
Configuring the authenticator
Step Command Remarks
1. Enter system view. system-view N/A
2. Create a virtual template (VT)
interface and enter its view. interface virtual-template
interface-number
N/A
3. Configure the local device to
authenticate the peer by using
PAP.
ppp authentication-mode pap
[ [
call-in ] domain isp-name ]
By default, PPP authentication is
disabled.
4. Return to system view. quit N/A
5. Create a local user account
for the authenticatee and
enter local user view. local-user username N/A
6. Set a password for the local
user. password { cipher | simple }
password
N/A
7. Configure the service type of
the local user as PPP.
service-type ppp N/A
8. Return to system view. quit N/A
9. Create an ISP domain or enter
an existing ISP domain view. domain isp-name
Optional.
To configure the ppp
authentication-mode command
with an ISP domain specified
which is not the default domain
system, configure this command
before configuring the ppp
authentication-mode command.
10. Configure local authentication
for the PPP users.
authentication ppp local Optional.
For more information about local user configuration and domain configuration, see Security
Configuration Guide.