Displaying and maintaining mac address tables, Mac address table configuration example – H3C Technologies H3C WX3000E Series Wireless Switches User Manual

Page 46

Advertising
background image

36

Step Command

Remarks

1.

Enter system view.

system-view

N/A

2.

Enter interface view or port group
view.

Enter Layer 2

Ethernet/aggregate
interface view:

interface interface-type

interface-number

Enter port group view:

port-group manual

port-group-name

Use either command.
Settings in Layer 2
Ethernet/aggregate interface

view take effect on the interface
only. Settings in port group view

take effect on all member ports

in the port group.

3.

Configure the MAC learning limit
on the interface or port group, and

configure whether frames with

unknown source MAC addresses
can be forwarded or not when the

MAC learning limit is reached.

mac-address max-mac-count
{ count | disable-forwarding }

The default MAC learning limit
varies with devices. When the
MAC learning limit is reached,

frames with unknown source

MAC addresses are forwarded

by default.

Displaying and maintaining MAC address tables

Task Command

Remarks

Display MAC address table
information.

display mac-address [ mac-address [ vlan vlan-id ] |
[ [ dynamic | static ] [ interface interface-type

interface-number ] | blackhole ] [ vlan vlan-id ]
[ count ] ] [ | { begin | exclude | include }

regular-expression ]

Available in any view

Display the aging timer for
dynamic MAC address

entries.

display mac-address aging-time [ | { begin |
exclude | include } regular-expression ]

Available in any view

Display the system or interface
MAC address learning state.

display mac-address mac-learning [ interface-type
interface
-number ] [ | { begin | exclude | include }
regular-expression ]

Available in any view

Display MAC address
statistics.

display mac-address statistics [ | { begin | exclude |
include } regular-expression ]

Available in any view

MAC address table configuration example

The configuration examples were created on a WX5004 access controller and may vary with device

models.Check

Table 5

to see where you configure Ethernet interfaces.

Table 5 Ethernet interface configuration prerequisites

Hardware

Ethernet interface configuration prerequisites

Access controller modules (installed in a switch)

Advertising