H3C Technologies H3C WX3000E Series Wireless Switches User Manual
Page 73
63
Task Remarks
Configuring the timeout factor
Optional
Configuring the maximum port rate
Optional
Configuring the mode a port uses to recognize/send
MSTP packets
Optional
Enabling outputting port state transition information
Optional
Enabling the spanning tree feature
Required
Configuring the leaf
nodes
Setting the spanning tree mode
Required
Configure the device to
operate in STP-compatible
mode.
Configuring the device priority
Optional
Configuring the timeout factor
Optional
Configuring the maximum port rate
Optional
Configuring path costs of ports
Optional
Optional
Configuring the mode a port uses to recognize/send
MSTP packets
Optional
Enabling outputting port state transition information
Optional
Enabling the spanning tree feature
Required
Configuring protection functions
Optional
Complete the following tasks to configure RSTP:
Task Remarks
Configuring the root
bridge
Setting the spanning tree mode
Required
Configure the device to
operate in RSTP mode.
Configuring the root bridge or a secondary root
bridge
Optional
Configuring the device priority
Optional
Configuring the network diameter of a switched
network
Optional
Configuring spanning tree timers
Optional
Configuring the timeout factor
Optional
Configuring the maximum port rate
Optional
Optional
Configuring the port link type
Optional
Configuring the mode a port uses to recognize/send
MSTP packets
Optional
Enabling outputting port state transition information
Optional