Configuring vlans, Overview, Vlan fundamentals – H3C Technologies H3C WX3000E Series Wireless Switches User Manual
Page 23
13
Configuring VLANs
Overview
Ethernet is a network technology based on the Carrier Sense Multiple Access/Collision Detect
(CSMA/CD) mechanism. As the medium is shared, collisions and excessive broadcasts are common on
Ethernet networks. To address the issue, virtual LAN (VLAN) was introduced to break a LAN down into
separate VLANs. VLANs are isolated from each other at Layer 2. A VLAN is a bridging domain, and all
broadcast traffic is contained within it, as shown in
.
Figure 2 A VLAN diagram
A VLAN is logically divided on an organizational basis rather than on a physical basis. For example, all
workstations and servers used by a particular workgroup can be assigned to the same VLAN, regardless
of their physical locations.
VLAN technology delivers the following benefits:
1.
Confining broadcast traffic within individual VLANs.
This reduces bandwidth waste and improves network performance.
2.
Improving LAN security.
By assigning user groups to different VLANs, you can isolate them at Layer 2. To enable
communication between VLANs, routers or Layer 3 switches are required.
3.
Flexible virtual workgroup creation.
As users from the same workgroup can be assigned to the same VLAN regardless of their physical
locations, network construction and maintenance is much easier and more flexible.
VLAN fundamentals
To enable a network device to identify frames of different VLANs, a VLAN tag field is inserted into the
data link layer encapsulation.
The format of VLAN-tagged frames is defined in IEEE 802.1Q issued by the Institute of Electrical and
Electronics Engineers (IEEE) in 1999.
VLAN 2
VLAN 5
Switch B
Switch A
Router