Grass Valley EDIUS Pro v.7.4 Reference Manual - Manual (Page 113)

Chapter 3 Edit Settings — External Device Management
113
[SyncRec Start Timing] Set the timing adjustment at the beginning of playback on your PC as a number of frames.
[SyncRec End Timing] Set the timing adjustment when stopping recording on the deck as a number of frames.
[Record Position] Set position adjustment when starting to record as a number of steps.
[Setup Level] Set the setup level (black level). 0 IRE is used in Japan, and 7.5 IRE is used in North America.
[Use cueup command if the DV deck
supports it]
Check this item to help speed up the cueup operation if the deck has the CueUp function.
[Default] Return the settings of items marked with * to their defaults.
[Settings - Stereoscopic Setting] Dialog Box (Generic OHCI)
[Stereoscopic Mode] Select a stereoscopic processing format when outputting the video of the L side and the R side
in the project created in the stereoscopic edit mode.
When [L Only]/[R Only] is selected, export the video of either the L side or the R side.
When [Side by Side]/[Top and Bottom]/[Line Interleave]/[Blend]/[Anaglyph]/[Difference]/[Split
Grid] is selected, export the composite video of the L side and the R side.
“Stereoscopic Processing Type” (w page 132)
[Follow stereoscopic preview mode] Export the project in the same format as the preview window display in the stereoscopic edit
mode.
“Displaying Preview Window in Stereoscopic Edit Mode” (w page 131)
[Swap L/R] Check this item to display video with the L side (for left eye) and R side (for right eye) swapped.
Registering Device Presets when Using a Grass Valley Product for Input/Output
The following explains how to register device presets when using a Grass Valley product for input/output.
In the example in this section, the Grass Valley product STORM 3G is attached and used for SDI input/output. The operation procedure is
basically the same also when you use other Grass Valley products.
Since detailed settings items differ for each product, see the user manual included with the product.
1)
Click [Settings] on the menu bar, and click [System Settings].
3 Note
f If you use the restricted user profile, the system settings cannot be changed.
“Restricted user profile” (w page 107)
2)
Click the [Hardware] tree, and click [Device Preset].
f “Registering External Devices that Interact with Device Presets” (w page 109)
3)
Click [New].
f [Preset Wizard] will start up.
1 Alternative
f Right-click a blank area in the [Device Preset] list, and click [New].
4)
Enter the name of the device preset.
5)
Click [Select Icon], select the icon image, and click [OK].
f To use any image you like, click [...] and select a file.
6)
Click [Next].
7)
Click the list in [Interface], and select [STORM 3G].
f The name of the attached product is displayed as an interface at the list at [Interface]. Select the interface to use for input.
f You can make input settings by clicking [Settings] to the right of [Stream]. For more information, see the user manual included with the
product.
8)
Click the list in [Video Format], and select the video format of the source to capture.