Grass Valley EDIUS Pro v.7.4 Reference Manual - Manual (Page 74)

Chapter 2 Project Settings — Restoring Offline Clips
74
3 Note
f If offline clips, partial offline clips, and temporary editing clips exist on the timeline when you export the project to a file or tape or when
consolidating or exporting the project, a message is displayed. Restore the offline clips, partial offline clips, or temporary editing clips.
Otherwise, they will be exported as offline clips.
Restoring Partial Offline Clips
Restore the partial offline clips by retransfer the missing source or recreating the proxy. If needed, connect the device where the original
source is stored.
If either the L or R side of the stereoscopic clip cannot be referenced, perform the same restoration operations for offline clips.
“Restoring Offline Clips” (w page 70)
1)
Click the [Open Project] list button on the timeline.
2)
Click [Restore and Transfer Clips].
1 Alternative
f Click [File] on the menu bar, and click [Restore and Transfer Clips].
3)
Click [Open the clip restoration dialog] in the [Restore and transfer clip] selected dialog box.
f The [Restore and Transfer Clips] dialog box appears.
“[Restore and Transfer Clips] Dialog Box” (w page 74)
1 Alternative
f To restore the clips on the timeline only, double-click the offline clip icon on the status bar.
4)
Select the target range of the clip from the [Range] list.
5)
Select a clip (or clips) from [Clip list], and select a restoration method from the [Restoration Method].
6)
Click [OK].
f The process is executed with the restoration method selected in [Restoration Method].
7)
Click [Close] in the [Restore and transfer clip] selected dialog box.
[Restore and Transfer Clips] Dialog Box
* The screen shown is an example The displayed restoration method varies according to the type of offline clips.
(1) (2)
(3)
(4)
(6) (7)
(5)
(1) [Refresh] Click this button to refresh the clip list.
Restore clips to which the restoration method is set.