Grass Valley EDIUS Pro v.7.4 Reference Manual - Manual (Page 378)

Chapter 9 Audio Operations — Volume/Pan Adjustment
378
(6) Operation setting Switch the volume adjustment learning mode (operation setting) or the subject of volume/pan
adjustment from the list.
Setting to any of [Latch], [Touch] or [Write] sets the learning mode so points are added to the
rubber band. Pan cannot be adjusted in learning mode.
The master operation setting can be only [Master] or [Off].
[Master]
Adjust the volume of a whole track.
[Track]
Update individual tracks with pan control and fader operations. Learning is not implemented.
[Clip]
The clip where the timeline cursor is positioned is updated with pan control and fader
operations.
The rubber band is updated with operations. If a rubber band point is set, pan updates as
“Move All” and volume updates as “Move All On Scale”. However, if the value is -∞ at the
beginning of the operation, the setting will be updated as “Move All”.
Learning is not implemented.
[Off]
Lock the pan control and fader.
[Latch]
Implement learning from the time point where the fader starts to be dragged up to where
playback is ended.
[Touch]
Implement learning from the position where you start dragging the fader until it is released.
Release the mouse to return the fader to the original volume automatically.
[Write]
Implement learning through the entire playback.
Differing from [Latch] or [Touch], all the previously used volume values are overwritten
regardless of dragging/releasing the fader.
(7) [Change to Player]/
[Change to Recorder]
Specify the window where the source whose audio is to be adjusted is placed.
(8) [Audio Monitoring
Mode]
Set audio output for monitoring on the Player or Recorder.
“Audio Monitoring” (w page 388)
(9) [Reset audio level] * Reset the adjusted audio level.
(10) Level over indicator Illuminate when the level is over. Click to turn the light off.
(11) Fader Drag up and down to adjust the volume.
(12) [Play] Play the timeline from the timeline cursor position.
* Displayed only in the [Audio Mixer] dialog box on the Player.
Pan Adjustment
1)
Click [Toggle Audio Mixer Display] of the timeline.
f The [Audio Mixer] dialog box appears.
“[Audio Mixer] Dialog Box” (w page 377)
1 Alternative
f Click [View] on the menu bar, and click [Audio Mixer].
2)
Click the operation setting for the track for which the pan is to be adjusted, and select [Track] or
[Clip].
f Click [Track] to adjust pan on each track and click [Clip] to adjust pan for each clip at the timeline cursor position.